Fuji Xerox DocuPrint P505 d User Manual page 100

CentreWare Internet Services
 IPv4
Click [Edit] for the settings.

Mode:
Allows you to select a method for obtaining the IP address, subnet mask, and gateway
address.
 DHCP with Auto IP
The address, subnet mask, and gateway address will automatically be set via DHCP/AutoIP.
If the machine fails to communicate with the DHCP server, the AutoIP function is
automatically enabled and an IP address (169.254.xxx.xxx) is assigned to the machine.
When communication between the machine and the DHCP server recovers, the machine
obtains an IP address, a subnet mask, and a gateway address by the DHCP server.
 DHCP
The address, subnet mask, and gateway address will automatically be set via DHCP.
Static

Allows you to manually specify an IP address, a subnet mask, and a gateway address.
 BOOTP
The address, subnet mask, and gateway address will automatically be set via BOOTP.

IP Address
Enter the IP address when selecting [Static] at [Mode].
Note

7 

Subnet Mask
Enter the subnet mask when selecting [Static] at [Mode].
Note



Gateway Address
Enter the gateway address when selecting [Static] at [Mode].
Note



Release current IP when the Device is powered off.
For [DHCP with Auto IP] and [DHCP], select this to release the IP address to the DHCP
server when the printer is powered off.
 IPv6
Click [Edit] for the settings.
 Link-Local Address
Displays the Link-Local address.
 Self-Assigned Address 1:, Self-Assigned Address 2:, Self-Assigned Address 3:
Displays the self-assigned address.
100
Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
Specify an IP address using numbers (0 to 9) and periods (.).
Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
Specify a subnet mask using numbers (0 to 9) and periods (.).
Enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to 255.
Specify a gateway address using numbers (0 to 9) and periods (.).