Fuji Xerox DocuPrint P505 d User Manual page 168

Maintenance
4
Remove the cleaning tool from inside the front door.
Note
5
To remove any debris or toner dust, set the cleaning tool on the LED Lens Block. Slide the
cleaning tool until it stops at one end of the LED Lens Block. Then slide the cleaning tool in
the other direction until it stops at the opposite end. Repeat this motion two more times.
10
6
Replace the cleaning tool into its storage location inside the front door.
168
 If the cleaning pad is dirty, replace it. A replacement cleaning pad is included with the Drum Cartridge
Replacement Kit.