Fuji Xerox DocuPrint P505 d User Manual page 132

CentreWare Internet Services

Print Report
Select either [Errors Only] or [Always] to specify when to print the job results.
 Schedule Overwrite
Select this to enable scheduled overwrites.

Frequency
Select the interval at which the schedule recurs.

Day
(Only available for [Weekly])
Set the day of the week on which the schedule occurs.

Date
(Only available for [Monthly])
Set the date of the month on which the schedule occurs.

Time
Set the time for the overwrite to run.
 Manual Overwrite
Select [Overwrite Now] to start an overwrite job immediately.
Network Security
 SSL/TLS Settings
Configure the SSL/TLS settings.
7
Select the protocol from [TLS 1.0], [TLS 1.1], and [TLS 1.2].
[Device Certificate - Server]
[HTTP - SSL/TLS Communication]
[HTTP - SSL/TLS Port Number]
[LDAP - SSL/TLS Communication]
[SMTP - SSL/TLS Communication]
132
Select a certificate for SSL/TLS
communications.
Select whether or not to enable HTTP SSL/TLS
communications.
Set the port number used for HTTP SSL/TLS
communication from 1 to 65535.
The default value is 443.
Note
 Do not use the numbers assigned to the other
ports.
Set whether or not to enable the SSL/TLS
communications for authentication.
If you enable the LDAP SSL/TLS
communications, you must set [IP Address/Host
Name : Port] and [Backup IP Address/Host
Name : Port] under [LDAP Servers].
The port number for SSL/TLS communications
of the LDAP directory server is normally set to
636.
Select the SSL/TLS communication from
[Disabled], [STARTTLS (If Available)],
[STARTTLS], and [SSL/TLS].