Eu Declaration Of Conformity - Siemens KMS Assembly And Operating Instructions Manual

12.2

EU declaration of conformity

within the meaning of EC Directive 94/9/EC of 23.03.1994 and the legal requirements laid down for its
implementation
The manufacturer, Siemens AG, 46395 Bocholt, Germany, declares that the equipment described in these
assembly and operating instructions:
is equipment in the meaning of Article 1 and Article 13, Paragraph 1 c) of Directive 2014/34/EU and
complies with the requirements of Directive 2014/34/EU and the following standards:
EN 1127‐1 : 2011
EN 13463‐1 : 2009
EN 13463‐5 : 2011
EN 13463‐6 : 2005
EN 13463‐8 : 2003
EN 60079-0 : 2012 / A11:2013
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
Directive 2014/34/EU
Directive 94/9/EC
Voerde, 2015‐12‐15
Voerde, 2015‐12‐15
EU declaration of conformity
Vertical mill gear unit
KMS
Sizes 225 to 850
OJ L 96, 29.03.2014, p.309-356
OJ L 100, 19.04.1994, p.1-29
Mark Zundel / Head of PD MD AP VOE
Björn Podewski / Head of PD MD AP VOE BA
BA 9137 en 12/2015
88 / 89
(effective from 20.04.2016, 00:00 a.m.)
(effective until 19.04.2016, 12:00 p.m.)