Declarations; Eu Declaration Of Conformity - Siemens Flender FLUDEX 4600 Series Operating Instructions Manual

12.

Declarations

12.1

EU declaration of conformity

The manufacturer, Flender GmbH, D - 46395 Bocholt, Germany, declares that the equipment described in
these operating instructions:
FAO, FAD, FAE, FAM, FADB, FADS, FAK, FAKB, FAR
is in conformity with Article 1 and Article 13, Paragraph 1 b) ii) of Directive 2014/34/EU and complies with the
requirements of Directive 2014/34/EU and the following standards:
EN 1127-1 : 2011
EN 13463‐1 : 2009
EN 13463‐5 : 2011
This declaration of conformity is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union harmonisation
legislation:
Directive 2014/34/EU
Directive 94/9/EC
The technical documentation has been delivered to the body named below:
DEKRA EXAM GmbH, 44727 Bochum, Germany, code number: 0158.
Bocholt, 2017‐10‐01
Bocholt, 2017‐10‐01
FLUDEX 4600 en
Operating instructions 10/2017
EU declaration of conformity
FLENDER COUPLINGS FLUDEX®
OJ L 96, 29.03.2014, p.309-356
OJ L 100, 19.04.1994, p.1-29
Felix Henseler, Head of PD MD AP
Thomas Tebrügge / Head of PD MD AP COU BA
(effective from 20.04.2016, 00:00 a.m.)
(effective until 19.04.2016, 12.00 p.m.)
37