Siemens KMS Assembly And Operating Instructions Manual page 4

Vertical mill gear unit sizes 225 to 850
Table of Contents

Advertisement

Foreword
The term "Assembly and operating instructions" will in the following also be shortened to "instructions"
or "manual".
The term " 2014/34/EU" used in these instructions applies to the version designed in conformity to
directive 94/9/EC, if the product is put on the market by 19.04.2016, and to the version designed in
conformity to directive 2014/34/EU, if the product is put on the market on or after 20.04.2016.
Symbols in these assembly and operating instructions
This symbol additionally indicates an imminent risk of explosion in the meaning of Directive 2014/34/EU.
This symbol additionally indicates an imminent risk of burns due to hot surfaces in the meaning of
standard "DIN EN ISO 13732­1".
This symbol warns against risks from lifted and/or suspended loads.
Earth­connection point
Oil­filling point
Oil level
Oil level
Lubricating point
Lifting eye
Do not unscrew
Alignment surface, horizontal
Air­relief point
yellow
Oil­draining point
red
Oil level
Connection for
red
vibration­monitoring device
red
Apply grease
Eye bolt
Alignment surface, vertical
These symbols indicate the oil­level checking procedure using the oil dipstick.
These symbols indicate that the oil dipstick must always be firmly screwed in.
BA 9137 en 12/2015
4 / 89
yellow
white
red

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents