Approvals
10.1 EC declaration of conformity
Personal injury and property damage can occur
The installation of expansions that are not approved for products or their target systems may
violate the requirements and regulations for safety and electromagnetic compatibility.
Only use expansions that are approved for the system.
Note
The test was performed with a device and a connected communications partner that also meets
the requirements of the standards listed above.
When operating the device with a communications partner that does not comply with these
standards, adherence to the corresponding values cannot be guaranteed.
10.1
EC declaration of conformity
The EC Declaration of Conformity is available for all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
Process Automation
DE-76187 Karlsruhe
Germany
You can find the current EU declaration of conformity for these products
on the Internet pages under Siemens Industry Online Support
support.industry.siemens.com/cs/ww/en/ps/15987/cert).
108
WARNING
(https://
Operating Instructions, 02/2023, C79000-G8976-C331-12
SCALANCE M874, M876