Terasic MAX10-Plus User Manual page 8

FPGA Device
• MAX 10 10M50DAF484C6G Device
• Integrated dual ADCs, each ADC supports 1 dedicated analog input and 8 dual function pins
• 50K programmable logic elements
• 1,638Kbits embedded memory
• 5,888Kbits user flash memory
• 4 PLLs
Configuration and Debug
• On-board USB-Blaster II (Mini USB type B connector)
• Optional JTAG direct via 10-pin header
• One slide switch for dual boot image selection
Memory Device
• 256MB DDR3 SDRAM (64Mx16 and 128Mx8)
• 512MB QSPI Flash
• Micro SD card socket
Communication and Expansion Header
• Gigabit Ethernet PHY with RJ45 connector
• UART to USB, USB Mini-B connector
• PS/2 mouse/keyboard connector
• 2x6 TMD (Terasic Mini Digital) Expansion Header
Audio
• 24-bit CD-quality audio CODEC with line-in, line-out jacks
Video Input
• HDMI RX, incorporates HDM v1.4a features, including 3D video supporting
Analog
• Two MAX 10 FPGA ADC SMA inputs
• Potentiometer input to ADC
• On-Board MIC input to ADC
• 2x10 ADC header with 16 analog inputs connected to MAX10 ADCs
• One DAC SMA output
Switches, Buttons, and Indicators
• Five push-buttons
• Ten slide switches
MAX 10 Plus User
Manual
8 www.terasic.com
May 31, 2019