Terbly LPAR7QZ User Manual page 17

1. Access the main menu.
2. Tap the <Up/Down>button until"AutoProg"is displayed.
3. Press<ENTER>, the display will show"AutoProg".
4. Tap the <Up/Down>button the display will show"Master","Alone".
5. Press<ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.2. Mode Set
9.2.1. UserMode
With this function, you can create user defined channel orders.
1 Access the main menu.
2 Press<Up/Down>, the display will show"UserMode".
3 Press<ENTER>, the display will show"UserMode".
4 The display show "5CH" ,Press Up or Down , the display will show"5CH
"8CH "16CH "21CH".
5 Press<ENTER> to confirm or press<MODE/ESC> to return to the main menu.
9.3. Fastcolo
1 Access the main menu.
2 Press<Up/Down>, the display will show"Fastcolo".
3 Press<ENTER>, the display will show"Fastcolo".
4 The display show "Red "Green".......
5 Press<ENTER> to confirm or press<MODE/ESC>to return to the main menu.
9.4. Persnal
9.4.1. Stat Set
Addr DMX
With this function, you can adjust the desired DMX-address via an external controller.
1. Access the main menu.
2. Press <Up/Down>, the display will show "Addr DMX".
3. Press< ENTER>, the display will show"Addr DMX".
4. The display show "ON",Press <Up/Down>, the display will show "OFF".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
NoDMXSta
With this function, when the drive is not DMX signal, it runs automatism, close, hold and
music, the default is hold.
1. Access the main menu.
2. Press <Up/Down>, the display will show "
3. Press< ENTER>, the display will show"
4. The display show "Hold",Press <Up/Down>, the display will show "CloShut",
"Auto".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.4.2. Serv set
Password——The Password for this function is "50".
RDM UID—— With this function you can call up various submenus via RDM.
LPAR7QZ User Manual
".
NoDMXSta
".
NoDMXSta
16
XM1334-V1.2-B