Terbly LPAR7QZ User Manual page 21

9.8. Info
9.8.1. TimeInfo
Cur Time
With this function, you can display the temporary running time of the device from the last
power on. The display shows "XXXX", "XXXX" stands for the number of hours. The
counter is resetted after turning the device off.
1. Access the main menu.
2. Press <Up/Down>, the display will show "Cur Time".
3. Press< ENTER>, the display will show"Cur Time".
4. The display will show "XXXX" (Hours)
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
TotalHrs
With this function, you can display the running time of the device. The display shows
"XXXX", "XXXX" stands for the number of hours.
1. Access the main menu.
2. Press <Up/Down>, the display will show "TotalHrs".
3. Press< ENTER>, the display will show"TotalHrs".
4. The display will show "XXXX" (Hours)
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Last Hrs
With this function, you can display last the running time of the lamp. The display shows
"XXXX", "XXXX" stands for the number of hours
1. Access the main menu.
2. Press <Up/Down>, the display will show "Last Hrs".
3. Press< ENTER>, the display will show"Last Hrs".
4. The display will show "XXXX" (Hours)
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
TimePass
With this function, you can display the timer password.
1. Access the main menu.
2. Press <Up/Down>, the display will show "TimePass".
3. Press< ENTER>, the display will show"TimePass". The time password is 038.
LPAR7QZ User Manual
20
XM1334-V1.2-B