Terbly LPAR7QZ User Manual page 16

EditProg
EditScen
RecCntrl
TimeInfo
Info
TempInfo
Soft Ver
9.1. FuncMode
9.1.1. Address
With this function, you can adjust the desired DMX-address via the Control Board.
1. Access the main menu.
2. Tap the <Up/Down>button until"Address"is displayed.
3. Press<ENTER>, the display will show "Address".
4. Tap the <Up/Down>button the display will show "A001~AXXX"
5. Press<ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.1.2. ValuDisp
With this function you can display the DMX 512 value of each channel. The display
automatically shows the channel with a value changing.
1. Access the main menu.
2. Tap the <Up/Down>button until"ValuDisp"is displayed.
3. Press<ENTER>, the display will show "ValuDisp".
4. Tap the <Up/Down>button choose each channel.
5. Press<ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.1.3. SetSlave
With this function, you can define the device as slave.
1. Access the main menu.
2. Tap the <Up/Down>button until"SetSlave"is displayed.
3. Press <ENTER>, the display will show"SetSlave".
4. Tap the <Up/Down>button the display will show "Slave1", "Slave2", "Slave3".
5. Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
9.1.4. AutoProg
With this function, you can run the internal program. You can select the desired program under
"Select program". You can set the number of steps under "Edit program". You can edit the
individual scenes under "Edit scenes". With this function, you can run the individual scenes
either automatically, i.e. with the adjusted Step-Time.
LPAR7QZ User Manual
Prog 1 ProgTest
: EdStep01
Prog 10 ~EdStep64
Auto,......
Scen001 --ScenTime--
~ Scen250 --fadeTime--
InByOut
XX~XX
Cur Time XXXX(Hours)
TotalHrs XXXX(Hours)
Last Hrs XXXX(Hours)
TimePass Password=XXX
Clr Last ON/OFF
HeadTemp XXX /
Ver x.x.x
15
T01SCxxx Testing program
S01SCxxx
Program in loop
S64SCxxx
Save and exit
Auto=xxx...
Red=xxx... Save
TIME=xx.xs return manual scenes edit
=xx
Automat. scenes rec
Power on running time
Fixture running time
Fixture Last times clear
Timer Password 038
Clear Fixture Last time
Temperature in the head
Software version of each
IC
and automatically
XM1334-V1.2-B