Assigning Names And Seat Numbers - Shure Microflex Complete Wireless MXCW Complete User Manual

Visible columns
Filter
To return to default settings, open

Assigning Names and Seat Numbers

The chairman and meeting operators will need to refer to the participants by either name, seat number, or both. The proper as­
signment of names and seat numbers is critical to ensure the continuity of the discussion.
When setting up the installation for the first time, each microphone unit appears with its default name and an automatically as­
signed seat number according to the order they were powered on. Use the Devices tab to match wireless devices to the antici­
pated seating chart.
Note: Devices already display the participant's name if an NFC card is inserted. See NFC Card Functionality for more details.
1. Draw a seating chart, or diagram, that represents the room. Number each seat that requires a microphone. Add partici­
pant names to the seating chart.
2. Provide seat names by clicking the seat name field and writing the new name for each unit.
Determine which columns display in the devices table:
• Seat number
• Seat name
• Role
• Battery
• RF strength
• Speak priority
• Left-button functionality
• Firmware version
• Serial number
• Mic gain
• Low-pass filter (12 kHz)
• High-pass filter (150 Hz)
Only allow devices with these attributes to display in the devices table:
• Speak priority
• Audio groups
• Left-button functionality
• Firmware version
more options and select Reset.
Shure Incorporated
54/101