Mount The Access Point Transceiver - Shure Microflex Complete Wireless MXCW Complete User Manual

• Limiting cable runs to ≤100 m between devices.
• Same firmware version* for all devices in your system
• Ensure MXCW components and the PC are on the same network and set to the same subnet.
Tip:*Keep the system upgraded to the latest available firmware version to ensure proper system compatibility and take advan­
tage of new features. See Firmware Updates for more information.

Mount the Access Point Transceiver

The directional antennas of the access point send and receive the RF signal in a cardioid pattern with the greatest sensitivity
toward the face of the device. Always aim this side toward the microphone coverage area.
Select a Location for the Access Point
The access point is typically mounted to a ceiling or wall near the microphone coverage area.
Use the following best-practices when selecting a location for the device:
• Direct the face of the access point toward the intended microphone coverage area.
• Position the access point so there is nothing obstructing a line of sight to the microphones.
• Keep the device away from large metal objects.
• Keep at least eight feet between access points.
• Mount with the reset button accessible, as it may be useful for troubleshooting.
Shure Incorporated
27/101