Nfc Card Functionality; Speak Priority - Shure Microflex Complete Wireless MXCW Complete User Manual

3. Reorder seats to match the actual seat numbers in the room or on your seating chart:
◦ To move a single seat, click in the Seat field for that row and enter the new number. If another seat already exists in
that number, it will simply swap (exchange) positions with the other seat.
◦ To move multiple seats, click Push-to-renumber. Enable this mode to rearrange seats by pressing each device's
Speak buttons in the preferred order. This will remap devices according to the order the buttons are pressed.

NFC Card Functionality

Use the free Shure NFC Card Programming application (available on www.shure.com) to program NFC identification cards with
the names of meeting participants.
The NFC Card Programming application is designed to work with ACOS3 dual interface or contactless cards, such as the MX­
CDualCard. Use the ACR1252U USB card programmer (www.acs.com.hk) to write participant names to the identification cards.
To allow NFC functionality for conference units:
Go to Meeting Controls > Advanced > Enable NFC.
1.
2. Insert an NFC card into the conference unit so participants are identified by their name.

Speak Priority

When speaker interruption is enabled, participants can override each other in the speaker list based on their speak priority and
their role.
Manually adjust the speak priority of each participant to meet the needs of your meeting.
Example speak priority settings:
Multiple Chairmen
High-Ranking Delegates
• Set the highest-ranking chairman to 5
• Set the rest of the chairmen to 4
• Leave the normal delegates at 1 (default)
• Set the high-ranking delegates to 2
Shure Incorporated
55/101