Digital Audio Networking; Dante Network Audio; Switch Recommendations For Dante Networking - Shure Microflex Complete Wireless MXCW Complete User Manual

Digital Audio Networking

tm
Dante digital audio is carried over standard Ethernet and operates using standard Internet Protocols. Dante provides low la­
tency, tight clock synchronization, and high Quality­of­Service (QoS) to provide reliable audio transport to a variety of Dante de­
vices. Dante audio can coexist safely on the same network as IT and control data, or can be configured to use a dedicated net­
work.

Dante Network Audio

Connect your Dante audio network to the MXCW system.
10 input channels, useful for:
• Dante-enabled microphones, such as Microflex Advance Ceiling and Table Arrays
• Output from an automatic mixer or room system
• Videoconferencing signal of far-end audio
10 output channels, useful for:
• Recording system for archiving
• Live-streaming events
• Videoconferencing feed of near-end audio
Routing Dante Channels
Use the free Dante Controller software by Audinate to route Dante channels in and out of the MXCW system.

Switch Recommendations for Dante Networking

In addition to the basic networking requirements, Dante audio networks should use a Gigabit network switch or router with the
following features:
• Gigabit ports
Connect a network of devices
®
™
®
Shure Incorporated
72/101