Set And Reset The Service Interval; Enter The Service Interval Menu; Switch Between Reset Interval And Change Interval; Reset The Service Interval - Webasto Frigo Top 10 Workshop Manual

5

Set and reset the service interval

5.1

Enter the service interval menu

Fig. 10: 1 st level
5.2

Switch between reset interval and change interval

Fig. 12: SEr: Change interval
5.3

Reset the service interval

Fig. 14: Reset interval, No
Frigo Top 10 - 43 | Pordoi 2000 - 4000
Fig. 11: Service menu
Fig. 13: rSt: Reset interval
Fig. 15: Reset interval, Yes
The instructions below describe how to change the settings via the
control element.
+ XPress "Set" + "Down" and hold for 3 seconds.
SET
– The menu shows "LS" (1
– The degree symbol starts blinking.
+ XPress "Up" + "Down" and hold for 7 seconds.
– The menu shows "SEr" (Service menu).
/ XPress "Up" or "Down" to switch between:
– "SEr" change interval
– "rSt" reset interval
3 Make sure that the screen shows "rSt"
ATTENTION
Do not reset the service interval without servicing
the refrigeration system.
Result: System failure could occur due to insufficient
maintenance.
XReset of the service interval is only allowed after ser-
vice has been carried out.
More information about service is available in "Service
handbook and system data" supplied with the system.
XPress "Set".
SET
– The screen shows "n".
XPress "Up" to switch to "y".
XPress "Set" to reset the service interval.
SET
– "rSt" starts blinking.
– The clock symbol disappears.
– Screen shows "SEr".
– After approx. 10 s the display turns back to the
operating menu.
service level).
st
7