Introduction - Mitsubishi Electric AE-200A Installation Manual

2. Introduction

AE-200A/AE-50A/AE-200E/AE-50E is a centralized controller.
EW-50A/EW-50E is an LCD-less total management system.
Any connected air conditioning systems can be operated or monitored on the AE-200A/AE-50A/AE-200E/AE-50E's
LCD or the Web browser.
By using a PI controller that is built-in on the AE-200A/AE-50A/EW-50A/AE-200E/AE-50E/EW-50E, the energy-
control-related status can be displayed and Peak Cut control can be performed without a use of a PI controller
(PAC-YG60MCA).
Each AE-200A/AE-50A/AE-200E/AE-50E can control up to a total of 50 indoor units and other equipment. By
connecting AE-200A/AE-200E (main controller) and AE-50A/AE-50E/EW-50A/EW-50E (expansion controllers), up
to 200 indoor units and other equipment can be controlled.
AE-50A/AE-50E is not designed to be used alone.
Hereafter, AE-200A and AE-200E, unless otherwise specified, will be called "AE-200."
Hereafter, AE-50A and AE-50E, unless otherwise specified, will be called "AE-50."
Hereafter, EW-50A and EW-50E, unless otherwise specified, will be called "EW-50."
Note: Instead of AE-50A/AE-50E, LCD-less EW-50A/EW-50E can be used as an expansion controller.
WT07935X04 6