Carmanah G Series User Manual page 67

Although the G Series light bars contain yellow LEDs, LED Temperature should be set to OFF
for systems using light bars.
The LED Temperature setting is correctly pre-configured in the factory.
Internal Calendar
If a system is equipped with the optional internal calendar module, it will be provided with a USB cable that allows
users to program the calendar to schedule when the fixtures flash. When Calendar is set to on, the fixtures will
flash according to the schedule programmed in the calendar. The calendar accounts for Daylight Savings Time
(DST) and leap years and has a maximum schedule length of 512 days. The software to communicate with the
R829 G Series calendar system is available from Carmanah.
Where a group of radio-equipped R829s are used, setting CALENDAR to "On" will make an R829 a "Master"
system in the group. The other R829 "Slave" systems should have their calendars turned off, and they will flash
only whenever the Master system broadcasts on or off signals as it turns on and off itself.
Even if the Calendar setting is off, a calendar can still be programmed into the EMS using the
USB cable, but the R829 won't follow the programmed schedule until the calendar setting is
turned on.
The internal calendar function requires users to update their PC software to the latest version
before it can be used.
See separate calendar programming guide for comprehensive programming and operation of
the internal calendar feature.
Carmanah Internal Calendar default is on for systems equipped with the optional internal calendar module, and
off for systems without it.
Screenshot of Carmanah Calendar software:
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
G SERIES USER MANUAL
6.0 ENERGY MANAGEMENT SYSTEM PROGRAMMING
customerservice@carmanah.com
67
| carmanahtraffic.com