Summary of Contents for Carmanah SPEEDCHECK G Series
Page 1
G Series / SPEEDCHECK ® CABINET DOOR SWITCH RETROFIT GUIDE For all solar-powered G Series systems Solar Versions AC Versions 89323_RETROFIT_GUIDE_CABINET_DOOR_SWITCH_REVB Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
NOTE suggests optimal conditions and provides additional information. Warranty Disclaimer This guide will familiarize you with the features and installation of the Carmanah cabinet door switch retrofit kit. Failure to comply with the use, storage, maintenance, installation or placement instructions detailed in this guide could void the warranty.
Page 4
SpeedCheck radar speed sign and is not a replacement for the complete product user manual for each system respectively. Visit support.carmanah.com to download the complete product user manual. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
• Cable tie bases (2) • 3.0 Installation Procedure This guide is for installing the cabinet door switch retrofit kit into one of the following compatible Carmanah systems: • G Series – SC315-G, R820-G, R247-G, R829-G This retrofit is for systems that contain an Applied Information (AI) remote monitoring solution.
3. Drill two 0.196” diameter holes as noted using a #9 ANSI drill bit. 4. Deburr the holes on the outside and inside to remove all aluminum chips. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
2. Install two cable tie bases as shown below. Fasten the long wire from door switch to the two cable tie bases. Leave loose/untrimmed for now. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
5. On the upper left side of the browser, select the device name that matches the Device ID (the ID number labelled on the AI unit). Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
Page 9
7. Contact Applied Information to arrange the firmware in the AI unit to be programmed correctly, if this hasn’t already been done. a. Phone: 678.830.2170 b. Email: support@appinfoinc.com c. Web: appinfoinc.com Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Need help?
Do you have a question about the SPEEDCHECK G Series and is the answer not in the manual?
Questions and answers