Page 1
E / F / G Series RRFB MAST ARM KIT INSTALL GUIDE For mast arm mounted RRFB applications 90630_INSTALL-GUIDE_RRFB-Mast-Arm-Kit_RevA Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
NOTE suggests optimal conditions and provides additional information. Warranty Disclaimer This guide will familiarize you with the features and installation of the Carmanah Mast Arm kit for RRFB applications. Failure to comply with the use, storage, maintenance, installation or placement instructions detailed in this guide could void the warranty.
Page 4
This guide is specific to installing RRFB light bars on mast arm poles and is not a replacement for the complete product user manual. Visit support.carmanah.com to download the complete product user manual. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Do not reuse hardware that has been fully tightened • Do not generate heat • Do not use an impact wrench to install hardware • Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Do not reuse hardware that has been fully tightened Do not generate heat • Do not use an impact wrench to install hardware • Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
– behind the light bar. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
Page 8
4. Place the loop in the securement cable on top of the bracket assembly as shown below. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 9
RRFB MAST ARM INSTALL GUIDE 5. Install the cable ty-back clamp provided by the manufacturer (optional). Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Use a rubber mallet if necessary to aid in assembly. Ensure to observe correct fastener torgue settings provided by the bracket manufacturer. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
– under the bolt head. Failure to install the supplied plastic washers may result in damage to the sign sheeting. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
(if applicable). 2. Feed light bar cable through steel tubing and through the light bar bracket. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
Page 13
Ensure to leave enough cable length to form a strain relief loop on the inside of the light bar chassis (see step 5 – this section). Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
Page 14
For correct RRFB operation and MUTCD compliance, the black and white conductors must be landed on the left-hand side light bar, LED module. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 15
8. Slide the RRFB backplate over top of the light bar chassis as shown (if applicable). 9. Install the light bar front cover and secure using the four Phillips head screws provided with the light bar hardware kit. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 16
10. Using the supplied cable ties, form and secure a drip loop at the point where the light bar cable enters the back of the steel tubing. 11. Use remaining cable ties to secure the light bar cable to the steel tubing as required. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
If the pedestrian confirmation light is not required, use the supplied opaque labels to cover the indicator light apertures on the ends of the light bar. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...