Turning The System On - Carmanah G Series User Manual

4.5

Turning the System On

Once all the system elements and harnesses are installed, the system can be turned on.
Solar Systems:
1. Install the battery fuse.
2. Install the solar fuse.
AC Systems:
1. Turn on the supply power.
2. Turn on the breaker(s) in the cabinet.
Solar and AC Systems:
3. The system will energize and the user display will become active. If it is part of a radio-connected group, all
members of the group will now be able to communicate with each other. See the "5.0 EMS Programming and
Testing" section to adjust default settings and to perform system testing and commissioning.
4. Close the cabinet to complete installation. Ensure the solar panel is facing the equator (pointing south if you
are in the Northern Hemisphere).
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
2
G SERIES USER MANUAL
4.0 FIXTURE AND PUSH BUTTON INSTALLATION
1
customerservice@carmanah.com
45
| carmanahtraffic.com