Page 1
E / F / G Series POLARA iNX/iDX RETROFIT GUIDE For all pedestrian pushbutton-activated E/F/G Series and legacy R920 / SC315 RRFB systems 89525_RETROFIT-GUIDE_Polara-iNX-iDX_RevB Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
This guide will familiarize you with the features and installation of the Polara iNX pedestrian pushbutton as a retrofit into a compatible Carmanah system. Failure to comply with the use, storage, maintenance, installation or placement instructions detailed in this guide could void the warranty.
Page 4
This guide is specific to retrofitting the Polara iNX/iDX with an applicable crosswalk system and is not a replacement for the complete E/F/G Series product user manuals. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
Polara APS products for use on mid-block RRFB crosswalks use a control signal provided by the flash controller to trigger the voice message. For Carmanah systems using the older “Model-X” series products, this control signal was provided by the LED driver output. On newer Carmanah systems, using the new iNX/iDX products, this control signal is provided by a dedicated digital output from the flash controller (EMS).
POLARA INX/IDX RETROFIT GUIDE 4.0 Supported Systems and Firmware Check This guide details how to install the Polara iNX retrofit kit into one of the following compatible Carmanah systems: Product Existing Minimum EMS New Pushbutton System Model Image Pushbutton Firmware Required...
POLARA INX/IDX RETROFIT GUIDE General Notes Refer to the applicable product user manual for more details at support.carmanah.com. Prior to installation, a Solar Power Report must be provided to verify system sustainability with the addition of the iNX pushbutton. If you...
APS) 2-conductor pushbutton. For AC configurations or single battery systems, only a single RED/BLACK DC power connection will be present. Energy Management System (EMS) PCBA Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 10
APS. For AC configurations or single battery systems, only a single RED/BLACK DC power connection will be present. Energy Management System (EMS) PCBA Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
10. Splice Battery (+) and Battery (-) along with the BLUE/BLACK conductor into the connectors on the iNX harness. 11. Insert the ORANGE, BROWN and YELLOW conductors as shown below: Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 12
The Polara Field Service App is available for Android™ and iOS and can be downloaded free-of-charge from the ® Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
4. Remove the RF connector at the SMA connector on the radio module. A 5/16" open end wrench may be required. 5. Disconnect existing pushbutton, light bar(s), beacons, or LED signs, batteries and solar panel (if applicable). Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 14
13. Reconnect the light bar(s) or other LED fixtures and solar panel (if applicable). Completed internal iNX connections (solar panel connection not shown) 14. Reinstall the EMS chassis into the cabinet. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 15
The Polara Field Service App is available for Android and iOS and can be downloaded free-of-charge from the Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
RRFB light bar circuit. For systems using the iNX/iDX, this control signal now is produced by a digital output on the Carmanah EMS, labelled “EXT 2” on the EMS circuit board (see schematic in Section 5.0).
Page 17
Leave existing connections at the terminal blocks on the outside of the EMS cover. This applies to both DIN rail and screw-type terminal block configurations. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
Page 18
17. Reconnect the light bars or other LED fixtures and solar panel (if applicable). Completed internal iNX connections (solar panel connection not shown) 18. Reinstall the EMS chassis into the cabinet. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 19
The Polara Field Service App is available for Android and iOS and can be downloaded free-of-charge from the Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
9. Route iNX cable through the large opening on the lower front edge of the EMS cover. 10. Splice Battery (+) and Battery (-) along with the BLUE/BLACK conductor into the connectors on the iNX harness. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 21
The Polara Field Service App is available for Android and iOS and can be downloaded free-of-charge from the Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
10. Splice Battery (+) and Battery (-) along with the BLUE/BLACK conductor into the connectors on the iNX harness. 11. Insert the ORANGE, BROWN, and YELLOW conductors as shown below: Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 23
The Polara Field Service App is available for Android and iOS and can be downloaded free-of-charge from the Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
RRFB light bar circuit. For systems using the iNX/iDX, this control signal now is produced by a digital output on the Carmanah EMS, labelled “EXT 2” on the EMS circuit board (see schematic in Section 5.0).
Page 25
The Polara Field Service App is available for Android and iOS and can be downloaded free-of-charge from the Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
10. Reconnect all previously removed connections including antenna lead. 11. Reinstall the EMS chassis into the cabinet. 12. Connect the iNX harness to the EMS and pushbutton terminals as detailed below. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 27
The Polara Field Service App is available for Android and iOS and can be downloaded free-of-charge from the Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Slide the EMS down to remove and up to install before removing/installing screws. 8. Install 4 Phillips head screws to secure the circuit board in place. 9. Reconnect all previously removed connections including antenna lead. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Page 29
The Polara Field Service App is available for Android and iOS and can be downloaded free-of-charge from the Google Play Store or Apple App Store. *See appendix for information on pushbutton configuration. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
If you are experiencing any difficulties either installing or configuring the pushbutton system, please visit support.carmanah.com or contact Carmanah Technical Support. Toll Free: 1.877.722.8877 (US & Canada) Email: customersupport@carmanah.com Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...