Carmanah G Series User Manual page 23

METAL CAP INSTRUCTIONS (MIAMI DADE COUNTY ONLY):
6. Install the metal cap, grommet, and hardware onto the bracket as shown.
7. Lower solar panel and top of pole bracket down onto pole. For metal caps, route solar cables up through
grommet in cap. Make sure panel mount sits securely on top of pole cap as shown below (solar panel not
shown to allow visibility of pole top). When setting top of pole mount on pole, ensure two tabs are resting
on lip of pole cap. Also, look underneath solar panel to ensure wiring is not pinched.
8. Mate black MC4 connectors from solar panel to those from solar harness. A click noise indicates they are
fully mated. Tuck excess harness length down into pole or coil up excess harness and cable tie securely,
if desired.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
G SERIES USER MANUAL
3.0 SOLAR PANEL AND CABINET INSTALLATION
customerservice@carmanah.com
23
| carmanahtraffic.com