Solar-powered led pedestrian crosswalk flashing beacon (18 pages)
Summary of Contents for Carmanah G Series
Page 1
G Series AC TO SOLAR RETROFIT GUIDE For all AC powered G Series systems 89321_RETROFIT_GUIDE_AC_TO_SOLAR_G_SERIES_REVB Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Removing AC Components ........................7 Installing Battery Bumpers and Harnessing ....................8 Installing Solar Panel, Mount, and Harness ....................9 Installing Battery and Final Connections ....................9 Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
NOTE suggests optimal conditions and provides additional information. Warranty Disclaimer This guide will familiarize you with the features and installation of Carmanah's AC to solar retrofit kit. Failure to comply with the use, storage, maintenance, installation or placement instructions detailed in this guide could void the warranty.
Page 4
Please contact Carmanah for additional information and guidance when adding or replacing beacons or other hardware. This guide is specific to retrofitting the G Series cabinet from AC to solar power and is not a replacement for the complete G Series product user manual.
Varies Battery (size varies) Varies Solar Panel (size varies) Varies Solar Panel Mount (size and type vary) Varies Solar Panel Harness (length varies) Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
AC TO SOLAR RETROFIT GUIDE 3.0 Installation Procedure This guide is for installing the AC to solar retrofit kit into one of the following compatible Carmanah systems: System Release G Series • SC315-G Current • R820-G • R247-G • R829-G Refer to the individual product user manual for more details at carmanah.com.
3. Remove the DC power wires (red and black) on the right side of the cabinet. 4. Remove the AC input wires from the terminal blocks (line, neutral, and ground). Cap them off to with wire nuts. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Installing Battery Bumpers and Harnessing 1. Prep the surface of the inner cabinet with isopropyl alcohol and mount the 6x battery bumpers in the locations outlined below: Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
Installing Solar Panel, Mount, and Harness 1. Refer to Section 3.3 in the G Series manual (pages 20-26) for solar panel and mount installation. The G Series manual can be found on the Carmanah website - https://carmanah.com/support/product-...
Page 10
For 24/7 beacon systems you may need to temporarily change the input (inpt) to NO (normally open) so the system isn’t under a constant power draw Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
Need help?
Do you have a question about the G Series and is the answer not in the manual?
Questions and answers