Xilinx ZCU1285 User Manual page 72

To view the boot frequency saved in EEPROM, click the related get boot frequency button in the
Set Boot Frequency tab.
View Last Set CLK-103 Frequencies
The last frequencies that were written to the CLK-103 Module can be viewed using the Last Set
tab. Click the relevant last set button to view the last frequency written to the PLL by the SCUI
(see the following figure).
UG1348 (v1.0) July 16, 2019
ZCU1285 Board User Guide
Figure 36: CLK-103 Set Boot Frequency Tab
Appendix E: System Controller
www.xilinx.com
Send Feedback
72