Xilinx ZCU1285 User Manual page 26

User Pushbuttons
SW16 and SW17 (callout 43,
pushbuttons that are connected to RFSoC I/O pins as shown in the following table. These
pushbuttons can be used for any user-determined purpose.
Table 11: User Pushbuttons
Pin Function
AM22 User pushbutton
AN26 User pushbutton
System Monitor
The System Monitor (SYSMON) monitors the physical environment using on-chip temperature
and supply sensors, up to 17 external analog inputs, and an integrated analog-to-digital converter
(ADC). There is a separate SYSMON for the PL and the PS. The PS SYSMON is powered using
the on-chip reference voltage (V
regulator. See the following figure for connection details. More information about the system
monitor is available in the UltraScale Architecture System Monitor User Guide (UG580).
UG1348 (v1.0) July 16, 2019
ZCU1285 Board User Guide
Chapter 1: ZCU1285 Board Features and Operation
Figure 9: User I/O Connector J95
Figure 2: Board Component
RFSoC (U1)
Direction IOSTANDARD
Input
Input
), and the PL SYSMON is powered using an external 1.25V
REF
Locations) are active-High user
Schematic Net
Name
LVCMOS18 USER_PB1
LVCMOS18 USER_PB2
Send Feedback
Reference
Designator
SW16
SW17
www.xilinx.com
26