Cennexus Operations - Setup - Beckman Coulter Power Express Training Manual

Cennexus Operations – Setup
Introduction
Your Beckman Coulter Applications Specialist installs and configures the Cennexus
system. When preparing your Cennexus for operation, the Applications Specialist
configures the following functional areas from the Setup screen:
 System
 Instrument
 Outlets
 Test
 Aliquot (if you have an Aliquot module)
 Host
 Alert
You may need to make changes to the Test configurations after the initial setup during
the installation, such as adding a new test or modifying a test. Only an operator with a
Supervisor user level can make changes in the Setup screen.
Contact a Beckman Coulter representative, as needed, before changing any Setup
configurations if you are unsure of how the changes may affect the operation of your
Power Express.
For more information on test setup, refer to:
Reference: Cennexus Instructions for Use
 Chapter 2: Preparing for Operation
 Test Tab
Power Express In-Lab Training Manual Page 73 of 147
Version 2.0 (July 2016) Beckman Coulter Professional Development