Wps - D-Link DVG-N5402SP User Manual

DVG-N5402SP Wireless Router with 1 FXS Port
User Manual

WPS

On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a
method for connection to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
!
The WPS function allows adding devices only to the basic wireless network of the router.
Before using the function you need to configure one of the following authentication types:
!
Open with no encryption, WPA2-PSK or WPA-PSK/WPA2-PSK mixed with the AES
encryption method. When other security settings are specified, controls of the WPS page
are not available .
To activate the WPS function, click the ENABLE WPS button.
Figure 81. The page for configuring the WPS function.
Page 95 of 188
Configuring via Web-based Interface