Network Settings - D-Link DVG-N5402SP User Manual

DVG-N5402SP Wireless Router with 1 FXS Port
User Manual
Parameter
Locale selection
Ringback emulate
Flash type
Content-Type for flash
button
RTP DSCP / SIP DSCP
Registration expire
timeout
Registration retry
interval
Session expires
Transport protocol
Select your country from the drop-down list. By default, the value
RU (Russia) is specified. This setting defines the parameters of the
phone signals traditional for the specific country.
A ring back tone is a signal which informs a caller party that the line
of a called party is free.
Move the switch to the right so the router may replace the ISP's
ringback signal to the local one.
Flash Settings
The FLASH action type.
Transfer: switching between calls.
•
SIPInfo: sending a service SIP service message.
•
RFC2833: sending a service message in the RTP flow in
•
accordance with RFC2833.
If the SIPInfo value is selected from the Flash type drop-down
list, you can select the type of data transferred in SIP INFO
messages upon pressing the FLASH key.

Network Settings

Differentiated Services Codepoint.
From the relevant drop-down list, select tags for voice and signaling
traffic.
Registration
A time period (in seconds) after which the router changes the
registration status in case of no response from the SIP proxy server.
A time period (in seconds) after which the registration will be
repeated.
A time period (in seconds) between attempts to check the status of
the voice session.
From the drop-down list, select a protocol which will be used for
data exchange.
Page 141 of 188
Configuring via Web-based Interface
Description