D-Link DVG-N5402SP User Manual page 153

DVG-N5402SP Wireless Router with 1 FXS Port
User Manual
Parameter
Disable Do Not Disturb
Enable Do Not Disturb
Call barring
Disable Network Privacy
Enable Network Privacy
To change parameters of a code, select the relevant line in the table.
Figure 120. The VoIP / Call Feature Codes page. The window for editing the code parameters.
In the opened window, specify the needed parameters:
Parameter
VSC
Line 1
Click the SAVE button.
Disables rejection of incoming calls.
Enables rejection of all incoming calls (the busy tone
will be heard).
Forbids outgoing calls.
Allows incoming calls which bypass the server (calls
from unknown addresses).
Forbids incoming calls which bypass the server (calls
from unknown addresses).
The value of the code. To use a call feature code on the phone set
connected to the FXS port of the router, press * (the asterisk key)
and digital keys relevant to the code.
If a code requires a parameter, for example, a called party number
for forwarding, the dialing should be in the form *<digital
keys><number>.
Dialing from Phone
Move the switch to the right to enable the code for the phone
connected to the FXS port of the router.
Move the switch to the left to disable the code for this phone.
Page 153 of 188
Configuring via Web-based Interface
Description
Description