DVG-N5402SP Wireless Router with 1 FXS Port
User Manual
Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection
On the connection creation page, go to the All Settings tab. Then select the relevant value from
the Connection Type drop-down list and specify the needed values.
Figure 63. The page for creating a new PPPoE IPv6 connection. Selecting a connection type.
Parameter
Enable connection
Connection name
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Available for the advanced mode only.
A name for the connection for easier identification.
Page 75 of 188
Configuring via Web-based Interface
Description