Client - D-Link DVG-N5402SP User Manual

DVG-N5402SP Wireless Router with 1 FXS Port
User Manual

Client

On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access
point or to a WISP.
To configure the router as a client, move the Enable switch to the right. Upon that the following
fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz
Connecting to network
Figure 84. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
router's WLAN. Upon that the router can connect to another access
point as a wireless client.
A method for connecting to another access point.
Page 102 of 188
Configuring via Web-based Interface
Description