D-Link DVG-N5402SP User Manual page 91

DVG-N5402SP Wireless Router with 1 FXS Port
User Manual
When the Open or WEP value is selected, the following settings are displayed on the page
(unavailable for the wireless network operating modes which support the standard 802.11n):
Figure 77. The Open value is selected from the Network authentication drop-down list.
Parameter
Enable encryption WEP
Default key ID
Encryption key WEP as
HEX
Encryption key
(1-4)
For Open authentication type only.
To activate WEP encryption, move the switch to the right. Upon that
the Default key ID drop-down list, the Encryption key WEP as
HEX switch, and four Encryption key fields are displayed on the
page.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Move the switch to the right to set a hexadecimal number as a key
for encryption.
Keys for WEP encryption. The router uses the key selected from the
Default key ID drop-down list. It is required to specify all the
fields. Click the Show icon (
Page 91 of 188
Configuring via Web-based Interface
Description
) to display the entered key.