Selecting Operation Mode - D-Link DVG-N5402SP User Manual

DVG-N5402SP Wireless Router with 1 FXS Port
Configuring via Web-based Interface
User Manual

Selecting Operation Mode

In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. In this mode you can configure a WAN
connection, set your own settings for the wireless network, configure LAN ports to connect an STB
or VoIP phone, and set your own password for access to the web-based interface of the device.
Figure 22. Selecting an operation mode. The Wired connection value.
In order to connect your device to a wireless ISP (WISP), on the Device mode page, from the
Connection method list, select the Wi-Fi value. In this mode you can connect your device to
another access point, configure a WAN connection, set your own settings for the wireless network,
configure LAN ports to connect an STB or VoIP phone, and set your own password for access to the
web-based interface of the device.
Figure 23. Selecting an operation mode. The Wi-Fi value.
Page 32 of 188