D-Link DVG-N5402SP User Manual page 22

DVG-N5402SP Wireless Router with 1 FXS Port
User Manual
9. In the opened Wireless Network Connection window, select the wireless network DVG-
N5402 and click the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the barcode label on the
bottom panel of the device) in the Security key field and click the OK button.
11. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 11. The list of available networks.
Page 22 of 188
Installation and Connection