Table of Contents
Advertisement
3
Using the Instrument
Setting up the M829xA in the Keysight OMA Software
32
A standard M8290A system is pre-configured at the factory. This section
shows how to modify the factory configuration or to configure a
stand-alone module.
1
In the Keysight 89600 VSA Software interface, select Utilities >
Hardware > Discovered Instruments to view a list of all available
instruments. A screen similar to the following is displayed.
However, if your module is not listed, please add it to the Connection
Expert as described in section
Expert
on page 30 and hit the refresh button (
2
Switch to the Configurations tab and click on the plus (
Adding the M829xA to the Connection
).
Keysight M8290A Getting Started Guide
) button.
Advertisement
Table of Contents
