Table of Contents
Advertisement
Setting the Startup Delay for the Embedded Controller
Keysight M8290A Getting Started Guide
For the PCIe connection between the embedded controller and the
M829xA module to work properly, the AXIe modules must boot in a certain
order. To assure that this order is maintained at all times, a startup delay
needs to be configured on the AXIe chassis' system module. All M8290A
systems are pre-configured accordingly at the factory. However, if a
different AXIe chassis is used with any M829xA module, it may be
necessary to set the startup delay manually. To do this, please complete
the process described below.
1
On the embedded controller, go to the AXIe chassis' web interface (e.g.
by typing "169.254.1.0" into the address bar of a web browser):
AXle Chassis
4
39
Advertisement
Table of Contents
