Keysight M8290A Getting Started Manual page 38

4 AXle Chassis
38
1 PCle
2 USB
3 Multiframe Input
4 Multiframe Output
5 Trigger In
6 Trigger Out
7 Clock In
8 Clock Out
9 LAN
10 Status Light
Connects a host PC to the chassis via PCle.
Connects a host PC to the chassis via
USB 2.0. The USB 2.0 port is only available
for AXIe chassis with option -U20. Using
USB to connect to the M8290A is not
supported.
Synchronizes timing signals with multiple
daisy-chained chassis.
External Trigger connections.
The Trigger In of the AXIe ESM cannot be
used to trigger the M829xA.
The Trigger Out of the AXIe ESM cannot be
controlled by the M829xA.
External clock connections.
Connects the host PC to the chassis, via
10/100/1000 Ethernet.
In particular, the LAN connector is used for
ESM configuration, but NOT to communicate
to the M829xA.
Indicates the chassis status.
Keysight M8290A Getting Started Guide