Connectors Placement - Seco CCOMe-C30 User Manual

3.1 Connectors placement

On CCOMe-C30 carrier board, there are several connectors. Some of them are standard connectors, like Display Port, HDMI, Gigabit Ethernet, USB ports, and are
placed on the same side of the board, so that they can be placed on a panel of a possible enclosure.
In the following picture it is possible to see the position of each connector.
RTC Battery Switch/LED
connector header
SATA power
connector
SATA
connector
External
BIOS Flash
socket
Backlight
connector
LVDS
Connector
M.2 NVMe
Slot
eDP
connector
LVDS
external EDID
socket
microSIM
card slot
DP++ miniDP++
connector connectors
CCOMe-C30
CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
TOP SIDE
COM Ports Audio
GPIO Header
header Header
Dual Gigabit
USB 3.0 USB 2.0
Ethernet
ports ports #4 #5
connector
USB internal FAN
connector Connector
Feature
Header
M.2 SSD
Slot
M.2 WLAN
Slot
M.2 WWAN
Slot
Power
connector
BOTTOM SIDE
COM
LPC Debug Reset Switch
Express
Header SW2
connectors
microSD Power On
card slot switch SW1
20