Microsim Card Slot - Seco CCOMe-C30 User Manual

3.3.8

microSIM Card Slot

microSIM Card Slot - CN14
Pin Signal Pin
1 UIM_PWR
2 UIM_RST#
3 UIM_CLK
4 ---
3.3.9 M.2 NVMe Slot: Socket 3 Key M Type 2280
M.2 NVMe Slot (Socket 3 Key M type 2280)
Pin Signal Pin
1 CLK_REQ3
3 GND
5 PEG_Rx3-
7 PEG_Rx3+
9 GND
11 PEG_Tx3-
13 PEG_Tx3+
15 GND
17 PEG_Rx2-
19 PEG_Rx2+
21 GND
23 PEG_Tx2-
25 PEG_Tx2+
27 GND
29 PEG_Rx1-
31 PEG_Rx1+
33 GND
CCOMe-C30
CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Signal
5 GND
6 UIM_PWR
7 UIM_DATA
8 GND
CN37
Signal
2 +3.3V_S
4 +3.3V_S
6 ---
8 ---
10 ---
12 +3.3V_S
14 +3.3V_S
16 +3.3V_S
18 +3.3V_S
20 ---
22 ---
24 ---
26 ---
28 ---
30 ---
32 ---
34 ---
Interfaced to the M.2 WWAN slot CN12, as already told in previous paragraph,
there is a microSIM Card Slot, to be used in conjunction with M.2 Socket 2 Key
B modems. Here it is possible to insert the microSIM card provided by any
telecommunication operator for the connection to their network.
The socket is type Wellco T&C Co. p/n S0HG-150008-10G or equivalent, with
the pinout shown in the table on the left.
Another possibility for connecting mass storage devices is given by the M.2 Key M Slot, which
allows the plugging of M.2 High Capacity SSD drives with PCI-e
x4 interface
The connector used for the M.2 SSD slot is CN37, which is a
standard 75 pin M.2 Key M connector, type LOTES p/n
APCI0096-P005H, H=8.5mm, with the pinout shown in the
following table.
On the board there are also two Threaded Spacers which allows
the placement of M.2 Socket 3 Key M PCI-e SSD modules in
2260 or 2280 size.
Here following the signals related to this next generation storage interface:
PEG_Tx0+/PEG_Tx0-: PCI-e GFX port x4 lane #0, Transmitting Output Differential pair
PEG_Rx0+/ PEG_Rx0-: PCI-e GFX port x4 lane #0, Receiving Input Differential pair
PEG_Tx1+/GFX_Tx1-: PCI-e GFX port x4 lane #1, Transmitting Output Differential pair
PEG_Rx1+/GFX_Rx1-: PCI-e GFX port x4 lane #1, Receiving Input Differential pair
PEG_Tx2+/ PEG_Tx2-: PCI-e GFX port x4 lane #2, Transmitting Output Differential pair
PEG_Rx2+/ PEG_Rx2-: PCI-e GFX port x4 lane #2, Receiving Input Differential pair
PEG_Tx3+/ PEG_Tx3-: PCI-e GFX port x4 lane #3, Transmitting Output Differential pair
PEG_Rx3+/ PEG_Rx3-: PCI-e GFX port x4 lane #3, Receiving Input Differential pair
NVME_CLK_Clock+ / NVME_Clock-: PCI Express Reference Clock for the PCI Express lanes,
37