Connectors Placement - Seco COM-Express CCOMe-C96 User Manual

3.1 Connectors placement

On CCOMe-C96 carrier board, there are several connectors. Some of them are standard connectors, like Display Port, Gigabit Ethernet, USB ports, and are placed
on the same side of the board, so that they can be placed on a panel of a possible enclosure.
In the following picture it is possible to see the position of each connector.
PCI-e x4 Slot
#1
USB
Overcurrent
Feature
Header
I2C Flash
socket
FuSa
header
SATA M 7p
#2connector
SATA M 7p
#0connector
JTAG
Connector
POST Code
Display
microSD
Card Slot
eSPI/LPC
connector
SER #0 #2
COM #1 #2
header header
PCI-e x4 Slot PEG x16 SATA M 7p
#2 Slot #3connector
3.3V GPIO
Auxiliary SPI Flash
Power header Header
USB 3.1 USB 3.1
DP++ #2 DP++ #1
#0 #1 #2 #3+RJ45
LVDS EDID
5V Sense
LVDS
eDP
Flash Header connector
USB 2.0 HD Audio
DP++ #0 S/P -DIF
#4 #5 #6 #7 Jacks
VGA
SATA M 7p
#1connector
Mic In + Line
Out header
Front Panel
header
Fan
Connector
Coin Battery
Holder
COMe
Connectors
Power ATX
CPU
RTC Sense Smart Batt
connector SM Bus Power