Seco CCOMe-C30 User Manual page 44

JP9 position LVDS_VDD_EN Voltage Level
Inserted +5V_S
Not Inserted +3.3V_S
JP17 position VDD_LVDS Voltage Selector
1-2 +12V_S
2-3 +5V_S
JP16 position VDD_BKLT Voltage Selector
1-2 +12V_S
2-3 +5V_S
CCOMe-C30
CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
In the same way, Panel enable signal, LVDS_VDD_EN, can be regulated to be at +5V_S or +3.3V_S
voltage level, using jumper JP9.
The LCD panel voltage, i.e. signal VDD_LVDS, can be regulated to be +3.3V_S or +5V_S using jumper
JP17.
The LCD backlight voltage, i.e. signal VDD_BKLT, can be regulated to be +12V_S or +5V_S, using
jumper JP16.
44