Seco CCOMe-C30 User Manual page 60

Display supply voltages (SW_VDD_LVDS) and backlight supply voltage (SW_BACK_LVDS) are derived by SW_VDD and SW_BACK voltages, carried to the module
through the eDP connector CN2, simply by turning them On and Off using signals LVDS_VDD_ON and LVDS_BKLT_EN managed by the PTN3460IBS eDP to LVDS
bridge.
LVDS External EDID Flash Socket
Pin Signal Pin
1 GND
2 GND
3 GND
4 GND
CCOMe-C30
CCOMe-C30 - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by F.B. Copyright © 2019 SECO S.p.A.
Finally, on the module is also embedded an 8-pin Flash Socket, type LOTES p/n ASPI0001-
CN6
P001A, for the mounting of I2C EEPROMs in SO-8 format, which can be used
to store LVDS DDC Data (to be used when it is not possible to use directly the
Signal
DDC Channel available on module's connector CN3. In this case, dip switch
5 +3.3V_S
#2 on SW1 must be set to OFF).
6 +3.3V_S
7 LVDS_I2C_CLK
8 LVDS_I2C_DAT
60