Table of Contents
Advertisement
Chapter 5: Installing the Switch on a Wall
Wall Studs
Step 1: Install the
plywood base on
the wall.
62
The dimensions assume the wall studs are 41 centimeters (16 inches)
apart. You might need to adjust the width of the base if the distance
between the studs in your wall is different than the industry standard.
You should install the plywood base on the wall and then install the switch
on the base. Refer to Figure 25.
Plywood
Base
Figure 25. Steps to Installing the Switch with a Plywood Base
Step 2: Install the
switch on the
plywood base.
Advertisement
Table of Contents
