Table 3: Leds For The Twisted Pair Ports On The At-Gs980M/52Ps Switch - Allied Telesis AlliedWare Plus GS980M Series Installation Manual

Table 3. LEDs for the Twisted Pair Ports on the AT-GS980M/52PS Switch
State
Speed/Activity LED
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
PoE LED
Solid Green
Solid Amber
Flashing Amber
Off
GS980M Series Installation Guide
Description
The port has established a 1Gbps link to a
network device.
The port is transmitting or receiving
packets at 1Gbps.
The port has established a 10 or 100Mbps
link to a network device.
The port is transmitting or receiving
packets at 10 or 100Mbps.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
The port is delivering power to a powered
device.
The switch has shut down PoE on the port
because of a fault condition.
The switch has detected a powered device
on the port but cannot supply power to it
because it is already providing its
maximum power to other devices. The
maximum power budget for the switch is
740W.
This LED state can result from the
following conditions:
- The port is not connected to a powered
device or the device is powered off.
- The port is disabled in the management
software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
25