Adjusting Fence; Adjusting Router Bit Guard - Grizzly T28780 Owner's Manual

Adjusting Fence

The fence assembly on the Model T28780/
T28781 has an infeed fence and an outfeed fence.
These can be moved side to side to increase or
decrease the space around the router bit. The
infeed/outfeed fences are secured to the fence
base with T-bolts and steel knobs (see Figure 46).
Use these knobs to loosen or tighten the infeed/
outfeed fences against the base.
Adjustment
Knobs
Figure 46. Location of fence adjustment knobs.
-32-
Adjusting
Router Bit Guard
A clear router bit guard is included with the Model
T28780/T28781 (see Figure 47) to provide addi-
tional safety during router operations. It secures
to the fence base with two knobs and T-bolts. It
adjusts up-and-down and side-to-side to accom-
modate various router operations.
The router bit guard should be positioned verti-
cally about ⁄ " above the workpiece, and horizon-
1
8
tally it should be centered on the gap between the
infeed and outfeed fences.
Guard Knobs
Figure 47. Location of router bit guard
adjustment knobs.
Model T28780 T28781 (Mfd. Since 06/19)