Grizzly T25251 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
This mini workbench features independently
adjustable hand screws for irregular clamping
with the table jaws, four pivoting clamp dogs for
gripping flat work, and non-marring suction cup
feet for securing the mini workbench to smooth,
flat surfaces.
Figure 1. Model T25251 Mini Workbench.
Specifications
Weight .........................................................8 lbs.
Dimensions ......................... 18"W x 16
Work Surface .................................... 7
Clamping Capacity w/Table Jaws .................... 3"
Clamping Capacity w/Clamp Dogs ................8
Maximum Weight Capacity........................22 lbs.
Assembly
The Model T25251 Mini Workbench is completely
assembled. Insert the four clamp dogs into the
tables to accommodate different shapes and
sizes of work material.
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
⁄ "D x 6"H
1
2
⁄ " x 17
7
8
COPYRIGHT © APRIL, 2014 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
#MN16530 PRINTED IN CHINA
MODEL T25251
MINI WORKBENCH
Operation
Clamping Workpiece Between Table Jaws
The mini workbench can be used as a vise to
secure materials between the table jaws.
To clamp workpiece between table jaws:
1. Turn hand screws counterclockwise to open
jaws widely enough to insert workpiece.
2. Place workpiece between table jaws.
3.
Rotate hand screws clockwise to tighten jaws
and secure workpiece (see Figure 2).
Note: The hand screws on the mini work-
bench turn independently of one another.
By holding one hand screw stationary and
turning the other, the table opening can
be skewed (like a "V") to hold odd-shaped
objects.
⁄ "
3
4
⁄ "
1
8
Figure 2. Workpiece clamped between table
INSTRUCTIONS
jaws.