Power Panel - Champion 100203 Owner's Manual & Operating Instructions

CONTROLS AND fEATURES

Power Panel

(1) Ignition Switch – Flip the switch to the "START"
position to start the generator, or to the "ON"
position to start the generator manually. Flip to the
"OFF" position to turn off the generator.
(2) 12 V Charger Outlet
(3) Circuit Breakers – Protect the generator against
electrical overload.
(4) 120/240 Volt AC, 50A Receptacle
(NEMA 14-50R) – May be used to supply
electrical power for the operation of 120
and/or 240 Volt AC, single-phase 60 Hz electrical
loads.
(5) Ground Terminal – Consult an electrician for local
grounding regulations.
7
9
1
2
3
8
4 5
(6) 120V, 20A Duplex (2) (NEMA 5-20R) – May be
used to supply electrical power for the operation of
120 Volt AC, single-phase 60 Hz electrical loads.
(7) Circuit Breakers – Protect the generator against
electrical overload.
(8) 120/240V, 30A Twist-Lock Receptacle
(NEMA L14-30R) – May be used to supply
electrical power for the operation of 120
or 240 Volt AC, single-phase 60 Hz electrical
loads.
(9) Intelligauge with Power Meter – Display for running
hours, voltage and hertz.
100203
ENGLISH
7
6