How To Isolate Devices - EMS FirePoint 5000 Step-By-Step Manual

EMS 5000 FIREPOINT

4. How To Isolate Devices

To isolate a device on the 5000 FirePoint, Insert the key into the panel controls
keyswitch, located at the right of the panel.
Step
No
1 Turn the key to the on position and the
screen will display:
2 Press 0 key and the screen will now display:
3 Press  key three times and the screen will
display:
4 Press Yes key and the screen will now
display:
5 Press Yes key and the screen will now
display:
6 Press 0 key and the screen will now
display:
7 Enter the device number that you want to
isolate (e.g. 125) then press Yes key and the
screen will now display:
8 Press  key one time and the screen will
display:
9 Press Yes key and the screen will now
display:
10 Press No key three times and the screen will
now display:
©2015 EMS Security Group Ltd. All rights reserved.
Action
7
Screen Display
Panel in Access
Date
|***Options ****|
>Passwords
|Time and Date |
Yes =Select
|
Logging
>Fire System Opts<
|Remote Access
Yes = select
|** Fire system **|
>Dev. Isolate/Test<
| Net. Isolate/Test |
Yes= Select
|** Device Status *
>Number is: 001
|Status
Yes= Select
Enter Device
(Number 1-256)
Number > _
Yes = Finish
|** Device Status *
>Number is: 125
|Status
Yes= Select
|Number is: 125
>Status is: ACTIVE<
| Zone is
Yes= Select
|Number is: 125
>Status is :ISOLATE<
| Zone is
Yes= Select
Panel in Access
Date
TSD258 Iss 3 25/06/15 AJM
Time
<
Time
|
|
Time
Time
|
<
is: ACTIVE|
Time
Time
Time
|
<
is: ACTIVE|
Time
|
: 01 |
Time
|
: 01 |
Time
Time