EMS FirePoint 5000 Step-By-Step Manual page 6

EMS 5000 FIREPOINT
6 Press Number 8 on the keypad and the screen
will now display: (number 8 is a quick move key
that take you to the bottom of the menu)
7 Press  key once and the screen will now
display:
8 Press Yes key followed 0 key on the keypad the
screen will now display:
9 Press  key seven times and the screen will
display:
10 Press Yes key and the screen will now
display:
11 Press Yes key and the screen will now
display:
12 Enter the date Required to be viewed in
dd/mm/yy Format, (e.g.28/05/03) then press
Yes key and the screen will now display:
The log for the date selected can now be viewed by using the  
Arrows next to the display, all fire and fault events are listed in date
and time order. Using number 5 on the keypad will take you to the
oldest event, number 8 on the keypad latest event. (Look at the fault
list for examples of descriptions that are in the log).
©2015 EMS Security Group Ltd. All rights reserved. TSD258 Iss 3 25/06/15 AJM
6
|Reset System |
>Lan Options <
|^^^^^^^^^^^^^^|
Yes= Select Time
|Reset Security |
>Reset System <
|Lan Options |
Yes= Select Time
|** Main Menu **|
>Pins & Access <
|System Support |
Yes= Select Time
|Output Setup |
>Logging <
|Remote Rxers |
Yes= Select Time
|**Event Logging *|
>View Log At Date <
|View Entire Log |
Yes = Select Time
Enter the date to
View: / /
Yes = Finish Time
- - - - - - - - - - - - - - - -
On 28/05/03 At 00:00
New Day of 28/05/03
Yes = Select Time